Front Safety Belt Height Adjuster

Front Safety Belt Height Adjuster

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Remove upper B-pillar trim. Refer to => [ Upper B-pillar Trim ] Upper B-pillar Trim.

• Belt anchor or anchor rail does not need to be removed on seat belt.

- Remove bolt - 1 - (40 Nm) and remove belt relay - 2 - from belt height adjuster.

- Remove bolt - 3 - (20 Nm) and separate belt height adjuster - 4 - from mounting in carrier plate.





Installation

- To install, perform the steps used for removal in reverse order.