Diagram 223/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's and Front Passenger's Safety Belt Switch, Rear Side Airbag Crash Sensor (on driver's side), Rear Side Airbag Crash Sensor (on front passenger's side), Airbag Control Module, Driver's Safety Belt Tensioner Igniter 1, Front Passenger's Safety Belt Tensioner Igniter 1, Driver's Head Curtain Airbag Igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

E25 - Front Passenger's Safety Belt Switch

G256 - Rear Side Airbag Crash Sensor (on driver's side) Locations

G257 - Rear Side Airbag Crash Sensor (on front passenger's side) Locations

J234 - Airbag Control Module Locations Locations

J519 - Vehicle Electrical System Control Module Locations Locations

N153 - Driver's Safety Belt Tensioner Igniter 1 Locations

N154 - Front Passenger's Safety Belt Tensioner Igniter 1 Locations

N251 - Driver's Head Curtain Airbag Igniter Airbag Component Locations

T2j - Double Connector

T2k - Double Connector, yellow, on front right vehicle floor

T2aa - 2-Pin Connector, yellow, below driver's seat

T2ab - 2-Pin Connector, yellow, below front passenger's seat

T2av - Double Connector

T3m - 3-Pin Connector

T5t - 5-Pin Connector

T75 - 75-Pin Connector on J234

(109) - Ground Connection (in airbag wiring harness)

Previous Diagram 223/7 (Tracks 71-84)

Next Diagram 223/9 (Tracks 99-112)