Lower Engine Compartment Cover, Version 1, Large Noise Insulation, Removing and Installing

Lower Engine Compartment Cover, Version 1, Large Noise Insulation, Removing and Installing

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1783)






• Cordless drill 12V/2.0 Ah (VAS 5826)

Removing






1. Sheet metal screw (quantity 8), tightening specification: 2 Nm

2. Combination screws (quantity 3), tightening specification: 6 Nm


- Remove screws - arrows -.

- Remove noise insulation.

Installing






- Slide the noise insulation - 3 - into the bottom of the lock carrier - 2 - as illustrated.

- The narrow latches - arrow a - must be slid below or wide latches - arrow b - slid above the lock carrier edge - 2 -.

- Retaining tabs must engage over wide tabs in lock carrier holes when doing so.

- Tighten the bolts - arrows - to the tightening specification.