FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2010 >> Jetta GLI (1K2) L4-2.0L Turbo (CBFA) >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Keyless Entry >> Keyless Starting System >> Service and Repair >> Steering Column Switch, with KESSY >> Steering Column Combination Switch (E595), Valeo

Steering Column Combination Switch (E595), Valeo







Steering Column Combination Switch (E595), Valeo


The removal and installation of individual steering column switch components must be done in a specified sequence. Refer to=> [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

Removal

- Remove the steering wheel.

- Remove the steering column trim.

- Remove the steering column electronic systems control module (J527).






- Open the tabs - arrows - and remove the complete steering column combination switch (E595) from the steering column switch base carrier.

Installation

- Slide the steering column combination switch into the guides on the steering column switch base carrier until it latches secure.

Further installation is in the reverse sequence to removal.

pro multis Credits:Operation CHARM About Operation CHARM