ABS Mark 60 EC (ABS/EDL/ASR/ESP) Brake Lines, Connecting from Master Brake Cylinder to Hydraulic Unit

ABS Mark 60 EC (ABS/EDL/ASR/ESP) Brake Lines, Connecting from Master Brake Cylinder to Hydraulic Unit

On the brake master cylinder:





A Primary piston circuit of master brake cylinder to hydraulic unit
Identification: Diameter 6.5 mm and tube fitting with thread M 12 x 1.
B Secondary piston circuit of master brake cylinder to hydraulic unit
Identification: Diameter 6.5 mm and tube fitting with thread M 12 x 1.
1 Hydraulic unit to front left brake caliper
3 Hydraulic control unit to rear right brake caliper
4 Hydraulic control unit to rear left brake caliper

On hydraulic unit:





A Hydraulic unit to primary piston circuit of master brake cylinder
Identification: Diameter 6.5 mm and tube fitting with thread M 12 x 1.
B Hydraulic unit to master cylinder secondary piston circuit
Identification: Diameter 6.5 mm and tube fitting with thread M 12 x 1.
1 Hydraulic unit to front left brake caliper
Identification: Diameter 5.25 mm and tube fitting with thread M 10 x 1.
2 Hydraulic unit to front right brake caliper
Identification:Diameter 5.25 mm and tube fitting with thread M 12 x 1.
3 Hydraulic control unit to rear right brake caliper
Identification: Diameter 5.25 mm and tube fitting with thread M 10 x 1.
4 Hydraulic control unit to rear left brake caliper
Identification: Diameter 5.25 mm and tube fitting with thread M 12 x 1.