Steering Column Combination Switch (E595), Valeo

Steering Column Combination Switch (E595), Valeo


Follow the specified sequence when removing and installing steering column switch components. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

Removal

- Remove the steering wheel.

- Remove the steering column trim.

- Remove Steering Column Electronic Systems Control Module (J527). Refer to => [ Steering Column Electronic Systems Control Module (J527) ] Steering Column Electronic Systems Control Module (J527).






- Unlock all 3 releases - arrows - and remove the entire steering column combination switch (E595) from the steering column switch base carrier.

Installation

- Push the steering column combination switch onto the guide on the steering column switch base carrier until it latches.

- Install all components in reverse order of removal.