Golf With A 2.0L TDI Engine

Transmission to Engine Tightening Specifications

For the following:

Golf (from 2010) with a 2.0L TDI engine






M12 Bolts - 80 Nm

• If the insert tool 18 mm (T10179) is used: 65 Nm.

M10 Bolts - 40 Nm

Arrows - Alignment Sleeves



- Replace all the bolts for the transmission mount.

- First, install all the new bolts by hand.

- Then tighten the transmission mount bracket - A - to transmission bolts - 1 - to 40 Nm + an additional 90° (1/4) turn.






- When tightening the bolts - 2 -, the bracket can be pried into position with a screwdriver. Tightening specification for the bolts - 2 -: 60 Nm + an additional 90° (1/4) turn.

The subframe bolt must be replaced.