Manual

Starter

Application and Safety Notes


If assembly work is performed on starter, note the following:

• Switch off ignition, switch off all electrical consumers and remove ignition key.

• Disconnect the battery. Refer to => [ Disconnecting and Connecting Battery In Engine Compartment ] Disconnecting and Connecting Battery In Engine Compartment or => [ Disconnecting and Connecting Batteries In Luggage Compartment ] Disconnecting and Connecting Batteries In Luggage Compartment.

Follow the procedure in the Repair Information when disconnecting and connecting the battery. Refer to => [ Disconnecting and Connecting Battery In Engine Compartment ] Disconnecting and Connecting Battery In Engine Compartment or => [ Disconnecting and Connecting Batteries In Luggage Compartment ] Disconnecting and Connecting Batteries In Luggage Compartment.

DTC Recognition and Display

For fault-finding, use the Vehicle Diagnosis, Testing and Information System (VAS 5051A) , and the function "Guided fault finding". Refer to => [ Starter, Checking ] Testing and Inspection.

Description of Work

• Starter, checking, refer to => [ Starter, Checking ] Testing and Inspection.

• Vehicles with a 2.0l TSI engine, manual transmission, refer to => [ Starter ] Starter.

• Torque specifications, refer to => [ Starter Tightening Specifications ] [1][2]Specifications.