Headlamp Motor: Testing and Inspection

Headlamp Range Control Positioning Motor, Checking

Left Headlamp Beam Adjustment Motor (V48) and Right Headlamp Beam Adjustment Motor (V49) can be checked using Headlamp Range/Cornering Lamp Control Module (J745) Output Diagnostic Test Mode (DTM). Refer to => [ Output Diagnostic Test Mode ] Output Diagnostic Test Mode.

When performing fault-finding, use Vehicle Diagnosis, Testing and Information System (VAS5051B) or Vehicle Diagnosis and Service System (VAS 5052A) in the operating mode "Guided Fault Finding".