Acceleration Sensor: Testing and Inspection

Level Control System Basic Setting

Special tools, testers and auxiliary items required

• Vehicle Diagnosis, Testing and Information System (VAS 5051)

- Check basic setting of level control system.

Connect (VAS 5051).

Then;

- Press "Suspension, Wheels, Steering".

- Press "level control system".

- Press "01 - On Board Diagnostic (OBD) capable systems".

- Press"Functions".

- Press"Basic setting".

Now, (VAS 5051) displays specified values for basic setting.

- Measure actual standing heights of vehicle. Refer to => [ Ride Height, Measuring ] Ride Height, Measuring.

- If the measured values deviate from the specified values, the measured values must be entered into the Level Control System Control Module using (VAS 5051).

The Level Control System Control Module "calculates" the entered values and regulates the vehicle to the level for basic setting.