Tire Pressure Sensor

Tire Pressure Sensor

Removing

- Remove tire pressure sensor - 1 -.





- Counterhold metal valve using retainer (for example 2 mm spiral bore) while doing so.

Installing

- Press tire pressure sensor - 1 - against disc wheel (rim) and tighten.





- Counterhold metal valve using retainer (for example 2 mm spiral bore) while doing so.

After mounting tire to vehicle, tire pressure must be stored. Refer to => [ Storing Current Tire Pressure, Tire Pressure Monitoring System, Generation 1 ] Testing and Inspection.

Tightening Specifications