Parking Aid Control Module, Output Diagnostic Test Mode

Parking Aid Control Module, Output Diagnostic Test Mode

Special tools, testers and auxiliary items required

• Vehicle Diagnosis, Testing and Information System (VAS 5051A)

The following components can be checked via output Diagnostic Test Mode (DTM):

• Left Front Parking Aid Sensor (G255) in front bumper cover

• Left Front Center Parking Aid Sensor (G254) in front bumper cover

• Left Front Inner Parking Aid Sensor (G332) in front bumper cover

• Right Front Parking Aid Sensor (G252) in front bumper cover

• Right Front Center Parking Aid Sensor (G253) in front bumper cover

• Right Front Inner Parking Aid Sensor (G333) in front bumper cover

• Left Rear Parking Aid Sensor (G203) in rear bumper cover

• Left Rear Center Parking Aid Sensor (G204) in rear bumper cover

• Left Rear Inner Parking Aid Sensor (G334) in rear bumper cover

• Right Rear Parking Aid Sensor (G206) in rear bumper cover

• Right Rear Center Parking Aid Sensor (G205) in rear bumper cover

• Right Rear Inner Parking Aid Sensor (G335) in rear bumper cover

• Parking Aid Loudspeaker (R169)

• Left Front Parking Aid Display (Y13)

• Rear Parking Aid Display (Y15)

- Connect the (VAS 5051A).

- In (VAS 5051A) , select operating mode "Guided Fault Finding".

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Body repair procedures

• 01 - On Board Diagnostic (OBD) capable systems

• Parking Aid

• Functions

• Output Diagnostic Test Mode