Diagram 15/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Driver's Safety Belt Switch, Driver's Automatic Safety Belt Solenoid, Battery Switch-Off Relay, Main Battery Switch, Driver's Safety Belt Tensioner Igniter 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

E74 - Main Battery Switch Overview Of Relay Carrier

J234 - Airbag Control Module Control Modules in Rear Seats

J655 - Battery Switch-Off Relay

N297 - Driver's Safety Belt Tensioner Igniter 2 Locations

N378 - Driver's Automatic Safety Belt Solenoid Locations

T2as - Double Connector, on Driver's Automatic Safety Belt Solenoid

T2h - Double Connector, purple, on Main Battery Switch

T3n - 3-Pin Connector, on Driver's Safety Belt Tensioner Igniter 2

T4z - 4-Pin Connector, on Driver's Safety Belt Switch

T75 - 75-Pin Connector, yellow

TV22 - Terminal 30 Wire Junction 2, below front left seat

TV28 - Terminal 30 Wire Junction 3

(79) - Ground Connection (on left B-pillar) Overview Of Ground Connections In Interior

(109) - Ground Connection (in airbag wiring harness)

(382) - Ground Connection 17 (in main wiring harness)

(B292) - Plus Connection 16 (15a) (in main wiring harness)

* - Only models with belt force limiter

** - Through November 2007

Previous Diagram 15/3 (Tracks 15-28)

Next Diagram 15/5 (Tracks 43-56)