Engine Compartment Lamp (W27)

Engine Compartment Lamp (W27)


When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Carefully pry out light using a screwdriver.






- Remove lamp socket - arrow - from Engine Compartment Light.






Bulb, Replacing

- Carefully remove bulb from socket.






- Replace bulb (12V, 5 W).

Installation

Install in reverse order of removal.