Side Panel Tail Lamps Overview

Side Panel Tail Lamps Overview






- Tightening Specifications, refer to => [ Fastener Tightening Specifications, Tail Lamps In Side Panel ] Fastener Tightening Specifications, Tail Lamps In Side Panel.

1 - Connector

• For taillamp assembly in side panel.

2 - Bulb Holder

• Removing and installing, refer to => [ Side Panel Tail Lamp Bulb Holder ] Side Panel Tail Lamp Bulb Holder.

3 - Left Rear Turn Signal Lamp (M6) and Right Rear Turn Signal Lamp (M8)

• 12V / PY 21 W

• Checking, refer to => [ Vehicle Electrical System, Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

4 - Left Brake/Tail Light (M21) and Right Brake/Tail Light (M22)

• 12V / P 21 W / 4 W

• Checking, refer to => [ Comfort System Central Control Module Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

5 - Cap

6 - Screws

• For taillamp assembly in side panel.

7 - Lock Nut

8 - Housing

• Removing and installing, refer to => [ Side Panel Tail Lamps ] Side Panel Tail Lamps.

• Gap dimensions, refer to => [ Tail Lamp Gap Dimensions ] .

• Gap dimensions of tail light assembly in side panel can only be adjusted using the adjustable tail light assembly carrier which is not installed at the factory.

• The adjustable tail light assembly carrier is installed on retaining plate.

• Adjustable tail light assembly carrier in side panel, refer to => [ Adjustable Tail Lamp Assembly Carrier in Side Panel ] Adjustable Tail Lamp Assembly Carrier in Side Panel.

9 - Ball Head

10 - Plastic Clip Nut

• Replace for every removal of the taillamp assembly.

11 - Bracket

• Installing adjustable tail light assembly carrier, refer to => [ Adjustable Tail Lamp Assembly Carrier ] Adjustable Tail Lamp Assembly Carrier.