Rear Lid Tail Lamps Overview

Rear Lid Tail Lamps Overview






- Tightening Specifications, refer to => [ Fastener Tightening Specifications, Tail Lamp Assembly In Rear Lid ] Fastener Tightening Specifications, Tail Lamp Assembly In Rear Lid.

1 - Housing

• Removing and installing, refer to => [ Rear Lid Tail Lamps ] Rear Lid Tail Lamps.

• Gap dimensions, refer to => [ Tail Lamp Gap Dimensions ] .

2 - Left Back-Up Light (M16) and Right Back-Up Light (M17)

• 12V / H 21 W

• Checking, refer to => [ Comfort System Central Control Module Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

3 - Left Tail Light Lamp 2 (M49) and Right Tail Light Lamp 2 (M50)

• 12V / P 21 W / 4 W

• Checking, refer to => [ Comfort System Central Control Module Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

4 - Bulb Holder

• Removing and installing, refer to => [ Side Panel Tail Lamp Bulb Holder ] Side Panel Tail Lamp Bulb Holder.

5 - Connector

• For tail light assembly in rear lid.

6 - Nuts

• For tail light assembly in rear lid.

7 - Left Rear Fog Light (L46) and Right Rear Fog Light (L47)

• 12V / P 21 W

• Checking, refer to => [ Comfort System Central Control Module Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.