Front Interior Lamp (W1)

Front Interior Lamp (W1)


When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Carefully pry diffusion lens for Front Interior Lamp out of console in molded headliner - arrow -.






Bulb, Replacing

- Push contact plate - 1 - of Front Interior Lamp in direction of - arrow - and remove bulb - 2 - from socket.






- Replace the tubular bulb (12V, 10 W).

Installation

Install in reverse order of removal.