Left Rear Temperature Door

Left Rear Temperature Door

Removing

- Bring rear heating and air conditioning unit into service position. Refer to => [ Second Rear Heating and A/C Unit, Service Position ] Second Rear Heating and A/C Unit, Service Position

- Disengage lever - 1 - at Left Rear Temperature Door Motor (V313).





- Remove nuts - 2 -.

- Disconnect connector at Left Rear Temperature Door Motor (V313) and remove control motor.

Installing

Installation is carried out in the reverse order, when doing this note the following:

- Initiate Basic Setting function with Diagnostic Operation System (VAS 5051B). Refer to=> [ Climatronic A/C System with Automatic Control, Checking and Adjusting ] Adjustments.

• Hose to water drain valve must not be kinked or pinched. Refer to => [ Rear Condensation Water Hose with Valve, Checking ] Rear Condensation Water Hose with Valve, Checking.