Diagram 42/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Seat Heater Control Module, Driver's Seat Memory Program Control, Lumbar Support Height and Fore/Aft Adjustment Button, Seat Fore/Aft Adjustment Button, Seat Height Adjustment Button





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E97 - Driver's Seat Memory Program Control

E335 - Lumbar Support Height Adjustment Button

E336 - Lumbar Support Fore/Aft Adjustment Button

E418 - Seat Fore/Aft Adjustment Button

E424 - Seat Height Adjustment Button

J810 - Driver's Seat Adjustment Control Module

SB44 - Fuse 44 (on fuse panel B) Overview Of Fuses Overview Of Fuses

SD1 - Fuse 1 (on fuse panel D) Overview Of Fuses Overview Of Fuses

T4az - 4-Pin Connector

T10p - 10-Pin Connector, below driver's seat

T20d - 20-Pin Connector

T26b - 26-Pin Connector

(79) - Ground Connection (on left B-pillar) Overview Of Ground Connections In Interior

(95) - Ground Connection 1 (in power seat wiring harness)

(381) - Ground Connection 16 (in main wiring harness)

(B298) - Plus Connection 2 (30) (in main wiring harness)

* - Connector colours black or brown are depending on equipment

** - From May 2008

Next Diagram 42/3 (Tracks 15-28)