Sill Extension Assembly Overview, R50

Sill Extension Assembly Overview, R50

• The sill extension must be replaced after it has been removed.

• Removal and installation is described only for the left-hand side. Removing and installing on the right side is identical.





1 Extended sill panel

• Material PUR - GF 17

2 Cutting wire (357 853 999 A)

3 Pull handle (V.A.G 1351/1)

• Quantity: 2

4 Double sided adhesive tape

• Top and bottom

5 Bracket

• Glued inside the sill extension - 1 - with two-sided adhesive tape.

• Glued with 2K adhesive (DA 004 600 A2) on the sill.

6 Adhesion points

• 3x approximately 270 mm

• 2K adhesive (DA 004 600 A2)