Stabilizer Bar Assembly Overview

All Wheel Drive (AWD)

Stabilizer Bar Assembly Overview

The - arrow - points in driving direction.





1 Stabilizer Bar

• Be aware of the various suspension versions. Refer to => [ Vehicle Data Label ] Description and Operation.

• Removing and installing, refer to => [ Stabilizer Bar ] All Wheel Drive (AWD).

2 Rubber Mount

• Replace mounts always on both sides of vehicle.

3 Clamp

4 Bolt

• M8 x 28

• 25 Nm + 45° turn

• Always replace after removal.

5 Wheel Bearing Housing

6 Nut

• M10 x 55

• 40 Nm

• Self-locking.

• Always replace after removal.

7 Bolt

• Always replace after removal.

8 Coupling Rod

• Connects stabilizer to trailing arm/wheel bearing housing.

9 Subframe