Belt Webbing, Checking

Belt Webbing, Checking

- Pull belt webbing completely off automatic belt retractor.

- Make sure the seat belt is not dirty. If necessary, wash with a mild soap solution. Refer to Owner's Manual.

• If one of the types of damage (1 or 2) shown in the following is detected on a vehicle which has been in an accident - seat belt must be replaced completely with seat belt latch and seat belt height adjuster.

• If one kind of damage under points 1, 2, 3 and 4 is detected on a vehicle which has not been in an accident, only the damaged seat belt needs to be replaced.

• Belt webbing cut, torn or chafed.






• Webbing loops on belt edge torn.






• Burn marks from cigarettes or similar.






• One side of belt edge deformed or area of belt edge is wavy.