Front Side Marker Lamp Bulb

Front Side Marker Lamp Bulb

• The front bumper cover does not need to be removed when removing or installing the front side marker lamp bulb (M11).

• Illustrations depict removal and installation of the left side marker lamp.

Removing

- Remove the side marker lamp. Refer to => [ Front Side Marker Lamps ] Front Side Marker Lamps.

- Pull the glass base bulb - 2 - - in direction of arrow - straight out of the lamp socket - 1 -.






Front side marker lamp bulb: 12 V, W 3 W

Installing

Install in reverse order of removal. Note the following:

• When installing the bulb socket, pay attention to the housing; the openings under the rubber seal must align with the tabs on the housing.