Front Brake Caliper, FN 3 Assembly Overview

Front Brake Caliper, FN 3 Assembly Overview

• Install complete repair kit when servicing.

• Only use mineral spirits to clean brake parts.

• Apply thin coat of assembly paste G 052 150 A2 to brake cylinders, pistons and seals.





1 - Dust Cap

• Install onto bleeder valve

2 - Bleeder Valve

• 10 Nm

• Apply a thin coat of assembly paste G 052 150 A2 to the threads before screwing.

3 - Caps

• Insert in bushing

4 - Guide Pins

• 30 Nm

5 - Bushing

• Insert in brake caliper

6 - Brake Caliper

7 - Brake Carrier

• Bolt to brake caliper

8 - Retaining Spring

• Insert with both ends in holes of brake caliper

9 - Seal

• Removing and installing, refer to => [ Front Brake Caliper Piston ] Front Brake Caliper Piston

10 - Pistons

• Removing and installing, refer to => [ Front Brake Caliper Piston ] Front Brake Caliper Piston

• Apply thin coat of assembly paste G 052 150 A2 to piston before inserting

11 - Protective Cap

• Removing and installing, refer to => [ Front Brake Caliper Piston ] Front Brake Caliper Piston

• Do not damage when installing piston