Rear Bass Speaker

Rear Bass Speaker

• Removal and installation of left or right side speakers is identical.

Removal

Do the following before starting the procedure:

- Turn off the ignition and all electric consumers and remove the key.

In order to be able to replace a speaker, door trim must first be removed.

- Release locking mechanism of harness connector - arrows - and disconnect it.






- Using a suitable drill, drill out rivets - arrows - and remove speaker.






• To prevent corrosion, ensure that all metal particles from drilling are removed from inside the door.

• If paint on door frame is damaged during drilling, touch-up immediately.

Installation

- When installing, secure new speaker with special pop rivets (note replacement part number!)

Installation is in the reverse sequence to removal.