Rear Treble Speaker, 2-Door

Rear Treble Speaker, 2-Door

• Removal and installation of left or right side speakers is identical.

• After removing treble speaker, speaker trim must always be replaced.

• Treble speakers are secured to side trim from behind.

Before starting repair work removing, perform the following:

- Switch off ignition, switch off all electrical consumers and remove ignition key.

In order to replace speaker, side trim must first be removed.

• When removing side trim, treble speaker may break away from trim due to a short wire connector from wire mount to speaker connector - arrows -. Therefore, carefully remove side trim.





- Disconnect connector at treble speaker and then remove side trim.

- Cut off heat-sealed plastic clips on loudspeaker panel - arrows -.





- Remove trim and speaker from door trim.

Installing

- Insert speaker trim in door trim.

- Place speaker on speaker trim plastic clips.

- Heat-seal the plastic clips using a soldering iron - arrows -.





Further installation is in the reverse sequence to removal.