Rear Treble Speaker

Rear Treble Speaker

• Treble speakers are secured to door trim from behind.

• After removing treble speaker, speaker trim must always be replaced.

• Removal and installation of left or right side speakers is identical.

Removal

Do the following before starting the procedure:

- Turn off the ignition and all electric consumers and remove the key.

In order to be able to replace a speaker, door trim must first be removed.

- Release locking mechanism of harness connector - arrows - and disconnect it.






- Cut off heat-sealed plastic clips on speaker panel - arrows -.






- Remove trim and speaker from door trim.

Installation

- Insert speaker trim in door trim.

- Place speaker on speaker trim plastic clips.

- Heat-seal the plastic clips using a soldering iron - arrows -.






Installation is in the reverse sequence to removal.