Front Bass Speakers,

Front Bass Speakers,

Removing

Before starting repair work, perform the following:

- Switch off ignition, switch off all electrical consumers and remove ignition key.

In order to be able to replace a speaker, first door trim must be removed.

- Release locking mechanism of harness connector - arrows - and disconnect it.





- Using a suitable drill, drill out rivets - arrows - and remove loudspeaker.





• To prevent corrosion, ensure that all metal particles from drilling are removed from inside the door.

• If paint on door frame is damaged during drilling, touch-up immediately.

Installing

- When installing, secure new speaker with special pop rivets (note replacement part number!)

Further installation is in the reverse sequence to removal.