Cornering Lamp: Description and Operation

HID Headlamp and Cornering Lamp

• Always switch off headlamps with gas-discharge lamps and remove ignition key before working on headlamps.

• Automatic vertical headlamp aim control of headlamps with gas-discharge lamps has On Board Diagnostics (OBD).

• Familiarity with the function and operation of the lighting system is essential in the event of customer complaints.

• Additional information:

Refer to the Owner's Manual.

DTC Recognition and Display

The automatic headlamp range control and vehicle electrical system control modules are equipped with OBD which facilitates fault finding for the HID headlamps.

For troubleshooting, use Vehicle Diagnostic Tester in "Guided Fault Finding" operating mode.

Depending on vehicle equipment, the following functions can be adapted or coded via the Vehicle electrical system control module (J519). Refer to => [ Adapting ] Adapting.

• Adapting Coming Home Time

• Adapting high beams as assisting driving light

• Adapting Leaving Home Time

• Rain Light Sensor, Coding

• Headlamp Washer System, Adapting

• Coding control module for wiper electronics/deactivating APP

• Daytime Running Lamps, Coding and Decoding

• Adapting assisting driving light delay