Center Console Trim

Center Console Trim

• Removing and installing the trim is described for vehicles with a cup holder. On vehicles with the Multi Media System or a Converter with outlet, 12V, 230V (U13) , removing and installing is identical.

Removing

- Switch off ignition.

Vehicles with Multi Media System

- Remove the multi media control head.

Vehicles with Converter with Socket, 12V, 230V (U13)

- Remove the converter with socket, 12 V-230 VV (U13).

Vehicles with Cupholder

- Open beverage holder - 1 - and remove two bolts - 2 - (1.5 Nm).






- Remove the bottom trim - 1 -, from the mounts - arrow A -.






- Remove the upper trim from the mounts in the center console - arrow B -.

- Disconnect wiring harnesses from the trim.

Installation

- Install in reverse order of removal.