Exhaust Manifold Assembly Overview

Exhaust Manifold Assembly Overview





1 Gasket

• Replace

2 Nut

• Replace

• 25 Nm

3 Exhaust Manifold

• Coat stud bolts on the cylinder head with hot bolt paste.

• Remove upward.

4 Clip

5 Heat Shield

6 Bolt

• 10 Nm

7 Oxygen Sensor (O2S) (G39)

• 55 Nm

• Use the ring spanner 7 piece set (3337) for removal and installation.

• When reusing an oxygen sensor, use hot bolt paste to grease the threads. Do not let the paste get onto the slits of the oxygen sensor body.

• Connector color: black.