Input Shaft, Output Shafts, Differential and Shift Forks

Transmission Component Overviews

Transmission housing and 5th gear removing and installing. Refer to => [ Transmission Housing Cover and 5th Gear ] Transmission Housing Cover and 5th Gear.

Transmission disassembly and assembly. Refer to => [ Transmission ] Transmission.





Input Shaft, Output Shafts, Differential and Shift Forks






1 Differential

2 Seal

• Always replace

• Quantity: 4

3 Output Shaft

• Disassembling and assembling, refer to => [ Output Shaft ] Output Shaft.

4 Reverse Gear Shaft Support

• Disassembling and assembling, refer to => [ Reverse Shaft ] Reverse Shaft.

5 Reverse Shaft

• Disassembling and assembling, refer to => [ Reverse Shaft ] Reverse Shaft.

6 Input Shaft

• Disassembling and assembling, refer to => [ Input Shaft ] Input Shaft.

7 Reverse Gear Selector Fork

• Disassembling and assembling, refer to => [ Shift Forks ] Shift Forks.

8 Bolt

• 25 Nm

9 Selector Fork with Rail

• (Shift forks)

• Disassembling and assembling, refer to => [ Shift Forks ] Shift Forks.

10 Clutch Housing

• Disassembly and assembly, refer to => [ Transmission and Clutch Housings ] Transmission and Clutch Housings.

11 Nut

• 25 Nm + 90 degrees (1/4) additional turn.

• Always replace

• 4 nuts for the bearing mount.

12 Flange Shaft with Pressure Spring

• Removing and installing, refer to => [ Left Flange Shaft Seal ] Left Flange Shaft Seal.

13 Bolt

• 25 Nm