Lumbar Support Frame, Manual, Rabbit From My 2009

Front Seats

Lumbar Support Frame, Manual, Rabbit from MY 2009

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove front right seat trim. Refer to => [ Right Seat Trim ] Right Seat Trim

- Remove front left seat trim. Refer to => [ Left Seat Trim ] Left Seat Trim

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove the lumbar support lever. Refer to => [ Lumbar Support Lever, Rabbit from MY 2009 ] Lumbar Support Lever, Rabbit From My 2009

- Remove cover and upholstery from front seat backrest. Refer to => [ Front Seat Backrest Cover and Cushion ] Front Seat Covers and Upholstery

- Remove the two bolts - 1 - from the actuator (1.5 ± 1 Nm).

- Remove the side retainers - 2 - and - 3 - from the backrest frame.

- Remove the side springs.

- Remove the lumbar support - 4 - from the upper mounts - arrows - in the backrest frame.





Installation

- To install, perform the steps used for removal in reverse order.