Lumbar Support Frame, Manual, Rabbit From My 2004

Front Seats

Lumbar Support Frame, Manual, Rabbit from MY 2004

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove front right seat trim. Refer to => [ Right Seat Trim ] Right Seat Trim

- Remove front left seat trim. Refer to => [ Left Seat Trim ] Left Seat Trim

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Attach the backrest to the fixture for seat repair (VAS 6136).

- Remove cover and upholstery from front seat backrest. Refer to => [ Front Seat Backrest Cover and Cushion ] Front Seat Covers and Upholstery

- Remove two bolts - 1 - and remove adjusting wheel - 2 - from backrest frame.

- Drill out rivet - 3 -.

- Disengage both upper wires - 4 - of lumbar support from backrest frame.

- Remove lumbar support from backrest frame - 5 -.





Installation

- To install, perform the steps used for removal in reverse order.