Trunk / Liftgate Shock / Support: Service and Repair

Gas-Filled Strut Venting

- Clamp area - x - of the gas strut in the vise, area - x - = 50 mm.





CAUTION!
Clamping the gas-filled strut must only be done in this area - x -, otherwise there is a risk of an accident.

CAUTION!
Always wear eye protection when performing this procedure.

Cover the area of the separated portion with a clean rag.

Dispose of fluid and cleaning rag in a proper manner.

- Saw into the cylindrical part of strut in the first third of the total cylinder length, determined starting from the edge of the cover on the side with the piston rod.