Pressurized Line and Intake Hose to Power Steering Pump Overview

Pressurized Line and Intake Hose to Power Steering Pump Overview





1 Banjo fitting

• M16 x 1.5

• Tightening specification => [ Pressurized Line to Automatic Transmission 09G ] Pressurized Line Mount to Transmission Tightening Specifications.

2 Seals

• Replace

3 Pressurized line

4 Power steering pump

• Checking delivery pressure => [ Low Mounted Power Steering Pump, Checking Delivery Pressure ] Low Mounted Power Steering Pump, Checking Delivery Pressure.

• Before installing, fill with power steering fluid => Low Mounted Power Steering Pump.

5 Socket

• For power steering pumps manufactured by Kayaba

6 Clamp

7 Hex bolt

• M8 x 28

• Tightening specification => [ Pressurized Line to Automatic Transmission 09G ] Pressurized Line Mount to Transmission Tightening Specifications.

8 Spring clip

9 Intake hose

10 Bracket

• On cylinder block

11 Bracket

12 Hex bolt

• M10 x 25

• Tightening specification => [ Pressurized Line to Automatic Transmission 09G ] Pressurized Line Mount to Transmission Tightening Specifications.