Rear Window Assembly Overview

Flush-Bonded Windows

Rear Window Assembly Overview





1 Rear Window

• Removing and installing rear window, refer to=> [ Undamaged Rear Window ] Flush-Bonded Windows

2 Ceramic Coating

3 Dimension - a - = 4.5 mm

4 Sealing Lip

component part of pre-coating

5 PUR Adhesive Sealant

• Bead cross section: Width = 7 mm, height = 11 mm (including pre-coating, residual material on window glass and window flange)

• Minimum curing time, refer to => [ Minimum Curing Time ] Minimum Curing Time

6 Trim

7 Window Heater Contact