Generic Scan Tool: Description and Operation

Description and Operation

Check for technical bulletins that may supersede any information included in this service information.

Observe all safety precautions: => [ Safety Precautions ] Safety Precautions

View clean working conditions: => [ Clean Working Conditions ] Clean Working Conditions

• All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through the manufacturer.

• Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.

=> [ Evaporative Emission System ] Evaporative Emission System

=> [ Electronic Engine Power Control ] Electronic Engine Power Control

=> [ Fuel Injection System ] Fuel Injection System

=> [ Engine Control Module ] Description and Operation

=> [ Secondary Air Injection System ] Description and Operation

=> [ Ignition System ] Ignition System

=> [ Automatic Transmission ] Automatic Transmission