Driver/Front Passenger Interior Locking Switch

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Driver/Front Passenger Interior Locking Switch

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Remove door trim panel.

- Disconnect the connector on the switch.

- Loosen the switch housing - A - by pushing it on the side from the frame - B - and remove it.





Installing

Install in reverse order of removal.