Hydraulic Hoses

Electric/Hydraulic Convertible Top

Hydraulic Hoses

• Hydraulic system is sensitive to any ingress of dirt.

• As soon as system is opened, corresponding components must be covered so that no dirt can enter hydraulic system.

Removing

- Remove left and right luggage compartment trim

- Remove side trim.

- Loosen toggle bolt - 3 - on hydraulic pump so that any present residual pressure can vent from system.





- Remove Torx bolt - 1 - (7 Nm).

- Remove hydraulic hoses - 2 - from hydraulic pump.

- Set hydraulic hoses aside and unclip from trim panel and side panel.

- Remove retaining clip - 1 - and remove hydraulic hoses from hydraulic cylinder.





- Guide hydraulic hoses through water tray.





Installing

• When installing, check for damages and proper seating of O-rings on hydraulic lines.

- Installation is performed in the reverse order of removal.

- Hydraulic system, filling and bleeding, refer to=> [ Hydraulic System, Filling and Bleeding ] Electric/Hydraulic Convertible Top (Overviews).