Electric/Hydraulic Convertible Top Assembly Overview

Electric/Hydraulic Convertible Top

Electric/Hydraulic Convertible Top Assembly Overview





1 Right Hydraulic Cylinder

• Removing, refer to=> [ Hydraulic Cylinder ] Electric/Hydraulic Convertible Top

2 Convertible Top Open Position Switch (F171)

• Installed only on right side

• Unclip from hydraulic cylinder - 1 -

3 Hydraulic Hoses

• Removing and installing, refer to => [ Hydraulic Hoses ] Electric/Hydraulic Convertible Top

4 Convertible Top Control Module (j256)

• In luggage compartment, right rear

5 Left Hydraulic Cylinder

• Removing, refer to=> [ Hydraulic Cylinder ] Electric/Hydraulic Convertible Top

6 Buffer Plugs

7 Oil Filler Plug

• 5 Nm

8 Hydraulic Pump

• Removing and installing, refer to => [ Hydraulic Pump Wheel ] Electric/Hydraulic Convertible Top

9 Toggle Bolt

• Unthreading toggle bolt releases pressure from hydraulic system and convertible top can be operated by hand.

10 Fill level Indicator

• Hydraulic oil must stand between min- and max marking with convertible top open

11 Right Contact Switch ( F156) or Left Contact Switch (F155)

Cover installed

• 2x

12 Convertible Top Operation Switch (E137)

• Located in center console