Rear Bass Speaker

Speakers

Rear Bass Speaker

Removal and installation of left or right side speakers is identical.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove the side trim..

- Release locking mechanism of harness connector - arrows - and disconnect it.





- Using a suitable drill, drill out rivets - arrows - and remove speaker.





• To prevent corrosion, ensure that all metal particles from drilling are removed from inside the door.

• If paint on door frame is damaged during drilling, touch-up immediately.

Installing

- When installing, secure new speaker with special pop rivets (note replacement part number!)

Further installation is in the reverse sequence to removal.