Brake Booster Vacuum Sensor

Brake Booster Vacuum Sensor

Removing

- Remove the battery..

- Open the cover - 1 - and remove the wire - 2 - from the fuse holder.





- Remove the bolts - arrows - and remove battery holder.

- Disconnect the electrical connector - 1 - from the brake booster vacuum sensor - 2 -.





- Insert a screwdriver between the stop and one end of the securing ring into the groove of the sealing ring.

- Now press the securing ring - 1 - as far out of the groove until the brake booster vacuum sensor - 2 - can be pulled out of brake booster.





Installing

- Installation is performed in the reverse order of removal.