Diagram 3/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Camshaft Position (CMP) Sensor, Knock Sensor (KS) 1, Engine Coolant Temperature (ECT) Sensor, Knock Sensor (KS) 2, Engine Control Module (ECM)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor [1][2]Camshaft Position Sensor Locations

G61 - Knock Sensor (KS) 1 [1][2]Diagrams Locations

G62 - Engine Coolant Temperature (ECT) Sensor Engine Coolant Temperature Sensor -G62- Locations

G66 - Knock Sensor (KS) 2 2.5L CBTA And CBUA

J519 - Vehicle Electrical System Control Module Control Modules In Interior, From July 2007

J623 - Engine Control Module (ECM)* Control Modules In Engine Compartment

T121 - 121-Pin Connector

(D102) - Connection 2, in engine compartment wiring harness

(D103) - Connection 3, in engine compartment wiring harness

* - Referenced in Self-Diagnosis and Guided Fault Finding programs as J220

Previous Diagram 3/10 (Tracks 113-126)

Next Diagram 3/12 (Tracks 141-154)