Diagram 50/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Speed (RPM) Sensor, Manifold Absolute Pressure (MAP) Sensor, Engine Control Module (ECM), Evaporative Emission (EVAP) Canister Purge Regulator Valve, Camshaft Adjustment Valve 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor [1][2]Diagrams Locations

G71 - Manifold Absolute Pressure (MAP) Sensor [1][2]Diagrams 2.5L CBTA And CBUA

J519 - Vehicle Electrical System Control Module Control Modules In Interior, From July 2007

J623 - Engine Control Module (ECM) Control Modules In Engine Compartment

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve [1][2]Canister Purge Control Valve Locations

N205 - Camshaft Adjustment Valve 1 [1][2]Diagrams Locations

T4x - 4-Pin Connector

T14a - 14-Pin Connector, near battery

T60 - 60-Pin Connector

T94 - 94-Pin Connector

(A99) - Connection 1 (87) (in instrument panel wiring harness)

(D101) - Connection 1 (in engine compartment wiring harness)

(D103) - Connection 3 (in engine compartment wiring harness)

(D107) - Connection 5 (in engine compartment wiring harness)

(D181) - Connection 2 (87a) (in engine wiring harness)

*** - Coolant fan connection

Previous Diagram 50/11 (Tracks 127-140)

Next Diagram 50/13 (Tracks 155-168)