Cylinder Head Assembly: Tools and Equipment

Special Tools

Special tools, testers and auxiliary items required

• Dial gauge holder (VW 387)

• Spark plug removal tool (3122B)

• Ignition coil puller (T40039)

• Compression tester (VAG 1763)

• Adapter (VAG 1381/5A)

• Drip tray (VAG 1306) or drip tray for workshop crane (VAS 6208)

• Spring type clip pliers (VAS 5024A)

• Polydrive bit and drive socket (T10070) or Polydrive key (3452)

• Spark plug removal tool (3122B)

• Valve seal removal tool (3364)

• Valve stem seal driver (3365)

• Adapter (T40012)

• Valve cotter assembly and disassembly device (VAS 5161)

• Guide plate for FSI engine (VAS 5161/19B)

• Trim removal wedge (3409)









Special tools, testers and auxiliary items required

• Torque wrench 5-50 Nm (VAG 1331)

• Torque wrench 40-200 Nm (VAG 1332)

• Locking pin (T03006)

• Multipoint socket (T10035)

• Counter hold tool (T10172)

• Camshaft clamp (T40070)





Special tools, testers and auxiliary items required

• Arbor (VW 195)

• Tube 60 mm dia. (VW 415 A)

• Seal installer (3241/4)