Crankshaft Needle Bearing, with DSG Transmission Only

Crankshaft Needle Bearing, with DSG Transmission Only

Special tools, testers and auxiliary items required

• Centering mandrel (3176) or

• Drift (VW 207C)

• Kukko (21/2) extractor (for example)

• Puller (T10055) with adapter (T10055/3)

Conditions

• Transmission is removed.

Removing

- Remove the needle bearing using commercially available puller, for example, (21/2) - arrow -, (T10055/3) and (T10055).





Installing

• The side of the needle bearing with writing on it must be readable when installed.

- Drive in using the (VW 207C) or the (3176).





Installed depth:





• Dimension - a - = 2 mm