Panorama Sunroof Sun Shade Motor

Panorama Sunroof Sun Shade Motor

Removing
- Remove the headlines.







- Disconnect the electrical connector - 1 - on the sun shade motor - 2 -.
- Remove the bolts - arrow - from the sun shade motor - 2 -.
- Remove the sun shade motor - 2 -.

Installing
Installation is performed in the reverse order of removal.







- Prior to installing the motor, make sure the sun shade is parallel by measuring - dimension a - between the shade arch - 1 - and the shade cartridge - 2 -.

Tightening torque
Screws - 3.5 Nm
- After completing all the work, perform a sun shade motor adaptation.