Panorama Sunroof Glass Panel Drive Motor

Panorama Sunroof Glass Panel Drive Motor

Removing
The sunroof motor and the sun shade motor are the same.

Removing the sunroof motor and removing the sun shade motor are the same.

Installing

with the front glass panel removed:
- Push the tilting mechanism on both sides all the way forward until it has completely lowered.







- Press the tilting mechanism only on those guiding slot locations - arrow - - 2 -, and not on the rails - 3 -.







with the front glass panel installed:







- Install the sunroof motor - 2 - and tighten the screws - arrow - to 3.5 Nm.
- Connect the electrical connector - 1 - to the sunroof motor - 2 -.
- Install molded headliner.
- After completing all the work, perform an sunroof motor adaptation.