Panorama Sunroof Rear Motor Support and Sun Shade Cable

Panorama Sunroof Rear Motor Support and Sun Shade Cable

Removing
- Remove the headlines.
- Remove the sun shade motor.
- Remove the sun shade.
- Remove the screws - arrow - for the cable cover - 1 - and - 2 - (2 Nm).







- Remove the cable covers - 1 - and - 2 - from the rear part - 4 -.







3 - Rear motor support

- Disconnect the sun shade cables - 3 - from the guide tubes - 1 - and the motor support - 4 -.







- Pry the motor support - 4 - out using a suitable screwdriver - 5 - from the rear lid - 6 -.







2 - Guide tube

- Remove the guide tube - 1 - from the mounting bracket - 4 - in the rear lid - 3 -.







- Remove the cable - 2 - from sun shade rail - 5 -.







Installing
Installation is performed in the reverse order of removal.

NOTE: Do not lubricate the sun shade slide cables and motor support.

- Install the sun shade.
- Install the sun shade motor.
- Install molded headliner.
- After completing all the work, perform a panorama sun roof adaptation.